Alterações no passo nº 1
Edição por Sarah Westberg —
Edição aprovada por Sarah Westberg
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_caution] First, make sure the power is off and disconnect the power. | |
| - | [* red] Use a special computer screwdriver to remove all the screws. (All screws are hexagonal screws, length 1.2mm) |
| + | [* red] Use a Torx security screwdriver to remove twelve 1.2 mm screws from the back case. |
| + | [* black] Use an opening tool to gently separate the front and back case. Work your way around the perimeter of the laptop and undo the clips holding it together. |
| + | [* black] Remove the back case. |