Alterações no passo nº 5
Edição por Sarah Westberg —
Edição aprovada por Sarah Westberg
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Flip the drone over so that it is right-side up. Then, use a soldering kit to remove the black, red, and white cables from the |
|---|---|
| + | [* black] Flip the drone over so that it is right-side up. Then, use a soldering kit to remove the black, red, and white cables from the motherboard. |
| [* icon_note] Trace the black, red, and white wires to make sure they are the wires connected to the drone arm you are replacing. | |
| [* icon_note] If new to soldering, a helpful guide can be found at [[Topic:Soldering|Soldering Skills]]. |