Alterações no passo nº 5
Edição por Anjali Abraham —
Edição aprovada por Anjali Abraham
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] The blue and red markers shown |
|---|---|
| + | [* black] The blue and red markers shown on the circuit board and earbud show their connections. |
| [* black] Place the positive probe of the multimeter on the pin of the blue connection seen on the circuit board. | |
| - | [* black] Place the negative probe on the pin of the blue connection |
| + | [* black] Place the negative probe on the pin of the blue connection on the earbud. |
| [* black] Measure the voltage across the pins. If the connections yield 0 V, desolder the pins. | |
| - | [* black] Apply the last three steps for the red connection to measure the voltage across the pins. |
| + | [* black] Apply the last three steps for the red connection to measure the voltage across the pins. Desolder the pins if the connection yield 0 V. |