Ir para o conteúdo principal

Alterações no passo #5

Edição por Lauren

Edição aprovada por Lauren

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_cautionblack] Gently lift the metal plate off of the drive assembly.
[* icon_caution]
Be careful not to sever the two wiresred wire or ribbon cable still attached to the two halves of the drive assembly.
[* black] Next,Then flip and rotatethe two halves of the drive assembly upside down as shown in the third picture.
[* icon_cautionblack] Gently lift the metal plate off of the drive assembly.
[* icon_caution]
Be careful not to sever the two wiresred wire or ribbon cable still attached to the two halves of the drive assembly.
[* black] Next,Then flip and rotatethe two halves of the drive assembly upside down as shown in the third picture.