Ir para o conteúdo principal

Alterações no passo #2

Edição por Robert Wagner

Edição aprovada por Robert Wagner

Antes
Depois
Sem alteração

Linhas de Passo

[* yellow] Remove the blue wire by gently pulling.
[* orange] Shown in the third picture, remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly.
[* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted'''(highlighted in the orange circles)circle)'''.
[* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted'''(highlighted in the orange circles)circle)'''.