Ir para o conteúdo principal

Alterações no passo #2

Edição por Lauren

Edição aprovada por Lauren

Antes
Depois
Sem alteração

Linhas de Passo

[* yellow] Remove the blue wire (as shown in yellow outline).
[* orange] Remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assemblyassembly (shown in the third picture).
[* orange] Remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assemblyassembly (shown in the third picture).
[* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted in orange circles).