Ir para o conteúdo principal

Alterações no passo #1

Edição por Robert Wagner

Edição aprovada por Robert Wagner

Antes
Depois
Sem alteração

Linhas de Passo

[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
[* red] Flip the optical drive assembly over and remove the 6 Phillips #1 screws as shown.
[* yellow] RemoveAfter the screws are removed, gently lift and remove the metal plate. DoBe careful not to disturb the brown ribbon cable.
[* red] Flip the optical drive assembly over and remove the 6 Phillips #1 screws as shown.
[* yellow] RemoveAfter the screws are removed, gently lift and remove the metal plate. DoBe careful not to disturb the brown ribbon cable.