Ir para o conteúdo principal

Alterações no passo #1

Edição por JordanB500

Edição recusada por Jake Devincenzi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
[* red] Flip the optical drive assembly over and remove 6 Phillips #1 screws as shown.
[* yellowviolet] Remove the metal plate. Do not to disturb the brown ribbon cablecable, using a Phillips #1 Screwdriver, turn the small knob one quarter turn clockwise.
[* yellowviolet] Remove the metal plate. Do not to disturb the brown ribbon cablecable, using a Phillips #1 Screwdriver, turn the small knob one quarter turn clockwise.