Ir para o conteúdo principal

Alterações no passo #1

Edição por Rowan White

Edição recusada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
[* red] Flip the optical drive assembly over and remove 6six (6) Phillips #1 screws as shown.
[* yellow] Remove the metal plate. Do not to disturb the brown ribbon cablecable (outlined in yellow).
[* red] Flip the optical drive assembly over and remove 6six (6) Phillips #1 screws as shown.
[* yellow] Remove the metal plate. Do not to disturb the brown ribbon cablecable (outlined in yellow).