Ir para o conteúdo principal

Alterações no passo #1

Edição por Rowan White

Edição aprovada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] At this point, your optical drive assembly should be separate from your GameCube and look like this(picture 1).
[* blackred] Flip the optical drive assembly over and remove 6 Phillips #1 screws as shown.
[* yellow] Remove the metal plate, being carefulplate. Do not to disturb the brown ribbon cable.
[* black] At this point, your optical drive assembly should be separate from your GameCube and look like this(picture 1).
[* blackred] Flip the optical drive assembly over and remove 6 Phillips #1 screws as shown.
[* yellow] Remove the metal plate, being carefulplate. Do not to disturb the brown ribbon cable.