Ir para o conteúdo principal

Alterações no passo #1

Edição por Miroslav Djuric

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] At this point, your Optical Drive Assemblyoptical drive assembly should be separate from your GameCube and look like this.
[* black] At this point, your Optical Drive Assemblyoptical drive assembly should be separate from your GameCube and look like this.
[* orange] Flip drive assembly over and remove 8 screws as shown.
[* icon_cautionyellow] Remove the metal plate, being careful to not to disturb the brown ribbon cable (shown in yellow)cable.
[* icon_cautionyellow] Remove the metal plate, being careful to not to disturb the brown ribbon cable (shown in yellow)cable.