Alterações no passo nº 1
Linhas do passo
| + | [* black] Turn the laptop upside down with the front toward you. |
|---|---|
| + | [* blue] Locate and remove seven Torx T8 2.5×7.0 screws. |
| + | [* icon_note] The screws may have rubber caps over them. If so remove with a spudger or similar tool. |
| + | [* violet] Locate and remove one Philips M2.0×5.0 screw. |
| + | [* black] Turn the laptop right-side up with the front toward you. |
| + | [* yellow] Release the three ZIF connectors and disconnect the ribbon cables. |
| + | [* red] This cable is routed over the top cover and needs to be disconnected at one end to allow the top cover to be removed. |
| + | [* green] Remove the RTC battery from its holder |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado