Histórico do passo nº 8 do guia How to Replace a Ceiling Fan Lighting Circuit Power-Limiting Device

Alterações no passo nº 8

Edição por Joseph Saucier — 30 de mar de 2022

Edição aprovada por Joseph Saucier

	[* black] Reinstall the light pull-switch into the circuit.
	[* red] Terminate the hot and neutral wires with the appropriate wire bundle using twist-on wire connecters.
-	[* icon_note] ~~*NOTE:*~~ After the completion of this step, there should be 4 white wires connected using one twist on wire connector, and 2 black wires connected using a second twist-on wire connector.
-	[* icon_note] ~~*NOTE:*~~ Wire color-coding in accordance with the NFPA 70 - National Electrical Code is applicable. White wires are designated as neutral wires, black wires are designated as hot wires.
+	[* icon_note] After the completion of this step, there should be 4 white wires connected using one twist on wire connector, and 2 black wires connected using a second twist-on wire connector.
+	[* icon_note] Wire color-coding in accordance with the NFPA 70 - National Electrical Code is applicable. White wires are designated as neutral wires, black wires are designated as hot wires.