Pular para o conteúdo principal

Alterações no passo #1

Edição por Richdave

Edição aprovada por Richdave

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Locate the modem card and remove the 2 M2.5×4.0 screws
[* black] Gently Lift the card out of the connectorThe modem card is it is plugged into a connector on the logic boardboard. Gently lift the card up and out of the laptop
[* icon_note] A plastic spudger may be useful in lifting the card out
[* black] Gently Lift the card out of the connectorThe modem card is it is plugged into a connector on the logic boardboard. Gently lift the card up and out of the laptop
[* icon_note] A plastic spudger may be useful in lifting the card out
[* icon_caution] Be careful as there is a small cable connected to the top edge of the modem card
[* blue] Disconnect the cable from the modem card

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Excluído