Skip to main content

Alterações no passo #1

Edição por Mike Dongyub Ryu

Edição aprovada by Mike Dongyub Ryu

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Locate and unscrew one captive screw located at the center of the bottom of the device.
[* icon_reminder] Captive screwsblack] If necessary, rotate the screw a few extra times to make sure that it is completely out of its tapped hole.
[* icon_note] A captive screw
cannot be completely removed from its socketthe device's component.
[* icon_reminder] Captive screwsblack] If necessary, rotate the screw a few extra times to make sure that it is completely out of its tapped hole.
[* icon_note] A captive screw
cannot be completely removed from its socketthe device's component.