Alterações no passo nº 19
Linhas do passo
| - | [* black] Insert one point of a pair of pointed tweezers into a gap in the edge of the EMI shield covering the digitizer connector. |
|---|---|
| + | [* black] Insert one point of a pair of pointed [product|IF145-020|tweezers] into a gap in the edge of the EMI shield covering the digitizer connector. |
| [* black] Use the tweezers to pry the EMI shield away from the display as much as you can without bending it. | |
| [* black] Repeat this procedure at different points around the shield until it is free. Remove the shield. | |
| [* icon_caution] Try not to deform the shield too much—you will need to reinstall it during reassembly. |