Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Ben Campbell —

Edição aprovada por Carsten Frauenheim

Antes
Depois
Sem alteração

Linhas do passo

-[* black] You may find it easier to work with the cables if you release the fan core from the tilt stage, by removing the four T8 screws underneath the fan core (two each accessible at each maximum tilt orientation).
+[* black] If you're having trouble working with the cables, you can try removing the fan core from the tilt stage. To do this, unscrew the four T8 screws located beneath the fan core (two screws are visible at each of the maximum tilt positions). This will allow you to separate the fan core and make it easier to work with the cables.