Conserte seus objetos Comunidade Loja

Alterações no passo nº 10

Edição por No Name —

Edição aprovada por No Name

Antes
Depois
Sem alteração

Linhas do passo

[* black] Flip the logic board and display cover over so the camera faces away from you.
-[* black] Bend the two halves of the device away from you to pry the final ribbon connector off the logic board.
- [* black] Note: The ribbon connector is bonded to the logic board with adhesive, simply pull it the break the glue bond.
+[* red] Bend the two halves of the device away from you to pry the final ribbon connector off the logic board.
+ [* icon_note] Note: The ribbon connector is bonded to the logic board with adhesive, simply pull it the break the glue bond.