Alterações no passo nº 7
Edição por Stefan Countryman —
Edição aprovada por Stefan Countryman
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Remove the following screws securing the fan assembly cover to the rest of the assembly: |
|---|---|
| + | [* red] One 5.0 mm T5 Torx screw. |
| + | [* icon_note] This screw holds the upper case, main fan assembly, and fan assembly together, and so must be removed. |
| + | [* blue] 3 Phillips #000 screws. |
| + | [* icon_note] The bottom right screw is just under the I/O board cable, and will be visible after it has been lifted out of the way. |
Imagem 1
Nenhuma imagem anterior
Adicionado