Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Stefan Countryman —

Edição aprovada por Stefan Countryman

Antes
Depois
Sem alteração

Linhas do passo

[title] Remove fan bumper
[* black] Carefully remove the rubber fan bumper from the edge of the heat sink.
-[* black] The bumper is gently held in place by the lips in the third image which wrap under the heat sink. There is no adhesive, so removal and reseating should be easy.
+[* icon_reminder] The bumper is gently held in place by the lips in the third image which wrap under the heat sink. There is no adhesive, so removal and reseating should be easy.