Pular para o conteúdo principal

Alterações no passo #2

Edição por Matt West

Edição aprovada por Matt West

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Use a pair of tweezers lift the latch ribbon cable connecting the GPS antenna to the central Printed Circuit Board (PCB): use the tweezers to lift the tan latch(marked by red box) off the ribbon cable and gently pull out the ribbon cable from underneath the opened latch.
[* black] Use a pair of tweezers lift the latch ribbon cable connecting the GPS antenna to the central Printed Circuit Board (PCB): use the tweezers to lift the tan latch(marked by red box) off the ribbon cable and gently pull out the ribbon cable from underneath the opened latch.