Ir para o conteúdo principal

Alterações no passo #8

Edição por Kyle Smith

Edição aprovada por Kyle Smith

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove the power button cable from the bracket.
-[* icon_reminder] During reassembly, remove any remaining adhesive and residue before installing new adhesive.
- [* icon_note] [guide|113604|Follow this guide|new_window=true] if you are using a pre-cut adhesive card.
- [* icon_note] [guide|126585|Follow this guide|new_window=true] if you are using custom-cut adhesives.
+[* icon_reminder] To install a new power button cable:
+ [* black] Remove any remaining adhesive and residue from the bracket.
+ [* black] If your part doesn't come with adhesive preinstalled:
+ [* black] [guide|113604|Follow this guide|new_window=true] if you are using a pre-cut adhesive card. [guide|126585|Follow this guide|new_window=true] if you are using custom-cut adhesives.
+ [* black] Place the power button cable onto the bracket and press firmly.