Ir para o conteúdo principal

Alterações no passo #8

Edição por Chris Perra

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Now that the top, left, and right edges of the glass are free from the display, slowly lift the top edge of the glass panel and gently rotate it out of the display.
[* black] If necessary, use the flat end of a spudger to free the bottom edge of the glass display panel from the display assembly.
-[* icon_caution] Before reassembling, be sure to clean both the inside of the glass display panel and the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is on.
+[* icon_caution] Before reassembling, be sure to clean both the inside of the glass display panel and the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is on. It is recommended to use a silicon roller and sticky sheets to clean well.