Ir para o conteúdo principal

Alterações no passo #7

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Insert wisdom here.
+[* black] Use a heat gun to soften the adhesive under the black strip along the left side of the front glass panel.
+[* black] Attach a suction cup along the left side of the front glass panel.
+[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
+[* black] Continue working along the left edge of the front display glass until it is separated from the display.