Ir para o conteúdo principal

Alterações no passo #3

Edição por Thomas Kirschbaum

Edição aprovada por Thomas Kirschbaum

Antes
Depois
Sem alteração

Linhas de Passo

+[title] Prop Up Back Panel
+[* black] While creating the gap between the Macbook and the back panel, insert a opening pick into the gap about 0.2in.
+ [* icon_caution] Don't insert the pick further, as this could cause internal damage
+[* black] Move the pick towards the left side of the Macbook and around the corner edge.
+[* black] Bring the pick up towards the top of the Macbook
+ [* black] Once you reach about the middle of the Macbook, you should hear a click. This is good! You have now unhooked part of the back panel.