Pular para o conteúdo principal

Alterações no passo #7

Edição por Brittany McCrigler

Edição aprovada por Brittany McCrigler

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] With the fan out of the way, we're (temporarily) slowed in our journey to the center of the Ouya—the heat sink is soldered in place, obscuring the processor.
[* icon_note] According to an Ouya engineer, solder was chosen over clips for mechanical strength, as they were (reasonably) worried about such a small console being knocked around or dropped. Soldering the heat sink to the motherboard proved for a much tougher design, better at surviving drop tests.
[* black] No trouble for us, we pulled out our trusty soldering iron[http://www.ifixit.com/Tools/Soldering-Station/IF145-018|soldering iron] and desoldering wick[http://www.ifixit.com/Tools/Desoldering-Braid/IF145-079|desoldering wick] and quickly free the heat sink.
[* black] No trouble for us, we pulled out our trusty soldering iron[http://www.ifixit.com/Tools/Soldering-Station/IF145-018|soldering iron] and desoldering wick[http://www.ifixit.com/Tools/Desoldering-Braid/IF145-079|desoldering wick] and quickly free the heat sink.