Conserte seus objetos Comunidade Loja

Alterações no passo nº 6

Edição por Rosemary DaCruz —

Edição aprovada por Rosemary DaCruz

Antes
Depois
Sem alteração

Linhas do passo

[* black] Reassemble the faceplate and knob. Remember to place the screws back in the places they were originally.
-[* icon_note] You will want to make sure the screws are properly lined up. Push them in until you feel a slight ''click'' into place, then screw them back in.
+[* icon_caution] You will want to make sure the screws are properly lined up before screwing them into the face plate. Without lining them up, they will not tighten and the face plate will fall off. If this happens, push the screws in until you feel a slight ''click'' into place, then screw them back in.