Alterações no passo nº 7
Edição por Michael Dieguez —
Edição aprovada por Michael Dieguez
- Antes
- Depois
- Sem alteração
Linhas do passo
[* black] Cut the strings to size. | |
[* black] For the ***bass strings***, measure ***one*** ***tuner head's length ***and trim it there. | |
[* black] For the ***treble strings***, measure ***one and a half*** ***tuner head's length*** and trim it there. | |
[* black] When inserting the string into the tuning post, the string end should protrude approximately 1/8th of an inch from the tuner hole. | |
[* black] The bass side tuning pegs should be turned in a counter-clockwise direction to tune to pitch and the treble side tuning pegs should be turned in a clockwise direction to tune to pitch. | |
- | [* |
- | [* |
+ | [* icon_note] Make sure to remember that the wraps around the tuning post must go ***under*** the string to properly stay in tune and to avoid creating a kink, which could break the string. |
+ | [* icon_note] ***Two to three*** wraps are perfect for the ***bass strings***. The ***treble strings*** require approximately ***six ***wraps. |