Histórico do passo nº 7 do guia How to Clean and Restring an Epiphone EJ-200 Acoustic Guitar

Alterações no passo nº 7

Edição por Michael Dieguez — 1 de mai de 2021

-	[* black] Cut the strings to size. For the bass strings, measure one tuner head's length and trim it there. For the treble side, measure one and a half tuner head's length and trim it there. Make sure to remember that the wraps must go UNDER the string in the tuning post.
+	[* black] Cut the strings to size.
+	[* black] For the *bass strings, measure one* *tuner head's length *and trim it there.
+	[* black] For the *treble strings, measure one and a half* *tuner head's length* and trim it there.
+	[* black] When inserting the string into the tuning post, the string end should protrude approximately 1/8th of an inch from the tuner hole.
+	[* black] The bass side tuning pegs should be turned in a counter-clockwise direction to tune to pitch and the treble side tuning pegs should be turned in a clockwise direction to tune to pitch.
+	[* black] Make sure to remember that the wraps around the tuning post must go *under* the string to properly stay in tune and to avoid creating a kink, which could break the string.
+	[* black] *Two to three* wraps are perfect for the *bass strings. The treble strings* require approximately *six *wraps.