Conserte seus objetos Comunidade Loja

Alterações neste passo

Edição por Kenneth Studman —

Edição aprovada por Kenneth Studman

Antes
Depois
Sem alteração

Linhas do passo

[* black] Grab an allen wrench that will fit into the truss rod. Also make sure to detune your guitar, to lessen any tension on the neck. This will prevent your strings from snapping during this process.
[* black] If your neck had a bow in it, you'll want to decrease the bow in the neck by tightening the truss rod. You do this by turning your allen wrench clockwise. If your neck has a hump to it, decrease that hump by loosening the truss rod by turning the allen wrench counterclockwise.
-[* icon_note] DO NOT do this too quickly. This step is one of several that most likely won't be done on the first try. Make small adjustments, check the neck, and adjust again. A good rule of thumb is to turn your allen wrench A QUARTER OF A TURN AT A TIME.
+[* icon_note] DO NOT do this too quickly. This step is one of several that most likely won't be done on the first try. Make small adjustments, check the neck, and adjust again. Turn your allen wrench A QUARTER OF A TURN AT A TIME.