Alterações no passo nº 1
Edição por Marissa Baumgartner —
Edição aprovada por Marissa Baumgartner
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_caution] TAKE THIS STEP SLOWLY. To make small adjustments, turn the allen wrench a quarter of a turn at a time, checking the neck regularly. Before beginning, detune your guitar strings, leaving room for strings to be manipulated without snapping. |
|---|---|
| - | [* icon_note] Locate the truss rod, found either on the headstock, under a plate in the headstock, or on the body towards the base of the neck. |
| - | [* black] For bowed necks, tighten the truss rod by turning the Allen wrench clockwise. For humped necks, loosen the truss rod by turning the Allen wrench counterclockwise. |
| - | [* red] Use an Allen wrench that can adjust the truss rod. |
| + | [* red] Locate the truss rod, found either on the headstock, under a plate in the headstock, or on the body towards the base of the neck. |