Alterações no passo nº 6
Edição por Inah Embile —
Edição aprovada por Inah Embile
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Remove the following: |
|---|---|
| - | [* red] The power jack connector |
| - | [* orange] The connector with one red wire and one black wire (may be hidden underneath a cooling fan wire) |
| - | [* yellow] The connector with the red, yellow, green, white, and black wires towards the bottom-right of the board |
| - | [* green] The large connector near the fan |
| - | [* black] Gently pull the power jack cable and socket out of its housing. It should come out entirely. |
| + | [* red] Remove the power jack connector. |
| + | [* orange] Remove the connector that has one red wire and one black wire. |
| + | [* icon_note] This connector may be hidden underneath a cooling fan wire. |
| + | [* yellow] Remove the connector with red, yellow, green, white, and black wires. located toward the bottom-right of the board. |
| + | [* icon_note] This connector is located on the bottom-right of the board. |
| + | [* green] Remove the large connector near the fan. |
| + | [* light_blue] Gently pull the power jack cable and socket out of its housing. It should come out entirely. |