Conserte seus objetos Comunidade Loja

Alterações no passo nº 3

Edição por Jeanette Lopez —

Edição aprovada por Jeanette Lopez

Antes
Depois
Sem alteração

Linhas do passo

-[* icon_caution] Be careful not to allow any hardware into the CPU fan and duct, which is located in the upper left.
+[* icon_caution] CAUTION: do not allow hardware or debris into the CPU fan and duct.
[* red] Remove the two 3-mm screws from the card equipped with black and white wires by using a Phillips #00 or Phillips #1 screwdriver.
[* icon_note] These are not captive panel screws and once loosened will be free to move about the assembly.
[* orange] Gently remove the card with your fingers.