Conserte seus objetos Comunidade Loja

Alterações no passo nº 3

Edição por Benjamin DeTerra —

Edição aprovada por Benjamin DeTerra

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Inspect the tooth and determine which angle to position the file for sharpening. This can be done by ensuring that the whole of the tooth is flat against the file. This can also be done using a measurement tool, but inspection should be fine.
+[* black] Inspect the tooth and determine which angle to position the file for sharpening. This can be done by ensuring that the whole of the tooth is flat against the file.