Ir para o conteúdo principal

Alterações no passo nº 6

Edição por Mark

Edição aprovada por Mark

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Using your hand unscrew the first nut on the axle. This is the jam-nut used to stop the axle from falling apart. Again, you may have to hold the front wheel to prevent the whole assembly from rotating. (Picture 1)
-[* black] Now hold the front wheel while using Channel Lock Pliers to remove the axle retaining nut, again holding the front wheel. (Picture 2)
+[* black] Using your hand unscrew the first nut on the axle. (Picture 1)
+[* black] ***Note:*** ''This is the jam-nut used to stop the axle from falling apart.''
+[* black] Now hold the front wheel while using Channel Lock Pliers to remove the axle retaining nut. (Picture 2)
+[* black] ***Hint:*** ''You may have to hold the front wheel again to prevent the whole assembly from rotating.''