Ir para o conteúdo principal

Alterações no passo #11

Edição por Carsten Frauenheim

Edição aprovada por Carsten Frauenheim

Sem alteração

Linhas de Passo

[title] Remove the board shield
[* black] Use a T8 Torx driver to remove the nine screws securing the board shield:
[* red] Six 8.8 mm black screws
[* orange] Two 35 mm silver screws
[* yellow] One 13.1 mm silver screw
+[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.