Ir para o conteúdo principal

Alterações no passo #4

Edição por Walter Galan

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] You will seeblack] Carefully pull the hard drive attached to the metal plate. Unplug the ATA/IDEdata cable straight up from the logic board to completely separate the metal plate fromits socket on the logic board.
[* icon_reminder] Don't forget to reconnectDuring reassembly, make sure the hard drive data cable before closingis firmly seated in its socket on the unit back up, orlogic board. Otherwise, during boot-up you will see a flashing ?question mark on your TV when you power it up"?".
[* red] You will seeblack] Carefully pull the hard drive attached to the metal plate. Unplug the ATA/IDEdata cable straight up from the logic board to completely separate the metal plate fromits socket on the logic board.
[* icon_reminder] Don't forget to reconnectDuring reassembly, make sure the hard drive data cable before closingis firmly seated in its socket on the unit back up, orlogic board. Otherwise, during boot-up you will see a flashing ?question mark on your TV when you power it up"?".