Skip to main content

Alterações no passo #1

Edição por sheala bacon

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] FlipTurn the Apple TV overAppleTv so the bottom of the unit is facing up.
[* black] Peel offYou need to remove the rubber backing which is held on with adhesive. In orderfooting to get access to prevent tearing the tape holdingscrews. Carefully peeling the rubber backing in place, be very careful or heatfooting up usingis the only way to remove it. Use a hairdryer or low temperature heat gun or hair dryerto loosen the glue tape holding the rubber in place.
[* black] FlipTurn the Apple TV overAppleTv so the bottom of the unit is facing up.
[* black] Peel offYou need to remove the rubber backing which is held on with adhesive. In orderfooting to get access to prevent tearing the tape holdingscrews. Carefully peeling the rubber backing in place, be very careful or heatfooting up usingis the only way to remove it. Use a hairdryer or low temperature heat gun or hair dryerto loosen the glue tape holding the rubber in place.