Skip to main content

Alterações no passo #1

Edição por Mike Sims

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] FlipGET A TOWEL to protect the Apple TV overglass and prevent you from losing a screw because it bounced around on a hard surface only to disappear amongst the dust bunnies and cockroaches.
[* black] Peel offCAREFULLY and with an even amount of lift on each side of the rubber base, peel the backing which is held on with adhesiveadhesive tape . In order to prevent tearing the tape holding the rubber backing in placematte, be very careful and use a wide putty knife so you can inch up on the matte ... first in the center closest to you while you gently lift, then either side by sliding the putty knife to your left, then over to your right, until you've progressed another inch or so. Rinse / Repeat! DO NOT ALLOW A CREASE TO TAKE HOLD IN THE MATTE - keep it as straight as possible.
[* black] Another option is to
heat upthe mat using a heat gun or hair dryer. This will loosen up the grip the tape has on the matte making it easier to peel off. The matte will trick you by making the process FEEL completely natural and free but it literally takes one extra foot lb of force to create that initial which will spread quicker than a cracked windshield - trust me, my first Apple TV disassembly yielded a torn rubber base matte.
[* black] FlipGET A TOWEL to protect the Apple TV overglass and prevent you from losing a screw because it bounced around on a hard surface only to disappear amongst the dust bunnies and cockroaches.
[* black] Peel offCAREFULLY and with an even amount of lift on each side of the rubber base, peel the backing which is held on with adhesiveadhesive tape . In order to prevent tearing the tape holding the rubber backing in placematte, be very careful and use a wide putty knife so you can inch up on the matte ... first in the center closest to you while you gently lift, then either side by sliding the putty knife to your left, then over to your right, until you've progressed another inch or so. Rinse / Repeat! DO NOT ALLOW A CREASE TO TAKE HOLD IN THE MATTE - keep it as straight as possible.
[* black] Another option is to
heat upthe mat using a heat gun or hair dryer. This will loosen up the grip the tape has on the matte making it easier to peel off. The matte will trick you by making the process FEEL completely natural and free but it literally takes one extra foot lb of force to create that initial which will spread quicker than a cracked windshield - trust me, my first Apple TV disassembly yielded a torn rubber base matte.