Histórico do passo nº 5 do guia Wooden Fence Picket Replacement

Alterações no passo nº 5

Edição por David Snowden — 18 de mar de 2021

Edição aprovada por David Snowden

	[* icon_caution] *CAUTION: This step involves hitting nails with a hammer in close proximity to your fingers. Work Gloves* are recommended if you are unfamiliar with using a hammer.
	[* black] Hold a *Wood Nail* approximately 1 inch from the side of the picket.
-	[* ~~icon_note~~] You may place the first nail 1 inch away from either the left or right side of the picket. Each section uses 2 nails so it does not matter which side you choose to work on first.
+	[* black] You may place the first nail 1 inch away from either the left or right side of the picket. Each section uses 2 nails so it does not matter which side you choose to work on first.
	[* black] Lightly tap on the *Wood Nail* with the *Hammer* to begin pushing the nail into the picket. Continue until the nail is fully in the picket.
	[* black] Repeat until there are 2 nails inserted in the picket at every cross section.