Alterações no passo nº 4
Edição por David Snowden —
Edição aprovada por David Snowden
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Before installing the new picket, clear the area of any debris. | |
| [* black] Obstructions may cause the picket to be crooked when installing, or make a gap too large for the nails to work properly. | |
| - | [* black] Use the *** |
| + | [* black] Use the ***tape measure*** to measure the gaps between the left and right side of the picket. |
| [* black] Doing this allows the replacement picket to be centered directly between the other pickets. |