Ir para o conteúdo principal

Alterações no passo #6

Edição por Robert Boyd

Edição aprovada por Robert Boyd

Antes
Depois
Sem alteração

Linhas de Passo

[title] Remove the upper switch housing
-[* red] Use a Phillips screwdriver to remove the four screws securing the upper half of the on/off switch housing to the lower half.
- [* icon_note] If you cannot remove the screws, unscrew them until they are completely unthreaded from the lower switch housing. Then proceed to the next step.
+[* red] Use a Phillips screwdriver to remove the four screws securing the upper half of the switch housing to the lower half.
+ [* icon_note] These screws may not come out of their recesses in the housing once they are completely unthreaded. If some stay inside once loose, don't lose track of them.