Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Gaurav Tiwari —

Edição aprovada por Gaurav Tiwari

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Then, place a screw with a washer attached into a hole and tighten it with the Allen wrench. Make sure the screws are on tight by using the short end of the Allen wrench on the head of the screw. Repeat this process for the other 5 screws and washers.
+[* black] Place a screw with a washer attached into a hole and tighten it with the Allen wrench. Make sure the screws are on tight by using the short end of the Allen wrench on the head of the screw. Repeat this process for the other 5 screws and washers.