Ir para o conteúdo principal

Alterações no passo #1

Edição por Sean Gardner

Edição aprovada por Sean Gardner

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Turn over the Gamecube to where the bottom side is facing up.
-[* red] Locate the screw on each corner of the device. The use a 4.5 mm Gamebit screwdriver to remove all four screws (circled in red).
+[* black] Turn over the Gamecube so that the bottom side is facing up.
+[* red] Locate the four screws (circled in red) on each corner of the device. Then, use a 4.5 mm Gamebit screwdriver to remove all four screws.