Ir para o conteúdo principal

Alterações no passo nº 10

Edição por sctanf

Edição aprovada por sctanf

Antes
Depois
Sem alteração

Linhas do passo

[title] Unscrew the mainboard
[* red] Unplug all the cables.
-[* icon_note] From top to bottom, left to right, the cables are front LED, proximity sensor, battery, right speaker, left speaker, top right camera, top left camera, power button/status LED, bottom right camera and microphone/volume controls, bottom left camera and microphone, USB Type-C port/headphone jack.
+[* icon_note] From top to bottom, left to right, the cables are front LED/IPD sensor, proximity sensor, battery, right speaker, left speaker, top right camera, top left camera, power button/status LED, bottom right camera and microphone/volume controls, bottom left camera and microphone, USB Type-C port/headphone jack.
[* orange] Unplug top antenna.
[* yellow] 1x 3.6mm hex screw
[* green] 4x P0 screws
[* black] Remove the heatsink.
[* light_blue] 4x P0 screws