Alterações no passo nº 6
Edição por ralph Kaj —
Edição aprovada por Spencer Day
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Unplug the battery | |
| - | [* red] Unplug the side WiFi antenna. To disconnect the cable, slide a thin, ESD-safe pry tool or tweezers under the metal neck of the connector and lift straight up from the board. |
| + | [* red] Unplug the side WiFi antenna. See step 5 of Recognizing & Disconnecting Cable Connectors guide. To disconnect the cable, slide a thin, ESD-safe pry tool or tweezers under the metal neck of the connector and lift straight up from the board. |
| [* orange] Remove the single P0 screw | |
| [* yellow] Remove the two P0 screws | |
| [* green] Unplug the battery. | |
| [* icon_reminder] Remember to put part of the battery ribbon cable under the logic board when reassembling. |