Ir para o conteúdo principal

Alterações no passo #6

Edição por Hassan Alshafie

Edição aprovada por Hassan Alshafie

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves.
+[* black] Once all of the screws have been removed, pry apart the plastic covers. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate the two sides.
+[* icon_caution] You may need to apply some gentle force to detach the covers. Be careful not to break the plastic screw pins.