Ir para o conteúdo principal

Alterações no passo #3

Edição por Holly

Edição aprovada por Holly

Antes
Depois
Sem alteração

Linhas de Passo

[* black] ***Remove the motherboard.***
-[* red] Using one hand to hold the device steady, use your free hand and unscrew the four 1.2mm Phillips screws with the Phillips #00 screwdriver from the motherboard (as highlighted in the photo).
+[* red] Using one hand to hold the device steady, use your free hand to unscrew the four 1.2mm Phillips screws with the Phillips #00 screwdriver from the motherboard (as highlighted in the photo).
[* black] Place the four screws in a safe place and then carefully lift up and remove the motherboard, then set it aside.
[* icon_note] ''Take a note of the moisture indicator located in the yellow rectangle on the bottom of the device in the second picture. If the moisture indicator is red then the device has water damage.''