Ir para o conteúdo principal

Alterações no passo #3

Edição por Kara

Edição aprovada por Kara

Antes
Depois
Sem alteração

Linhas de Passo

[* black] ***Remove the motherboard.***
-[* blue] Using one hand to hold the device steady, use your free hand and remove the 1.2mm Phillips #000 screwdriver to unscrew the four Phillips screws (as highlighted in the photo) from the motherboard.
+[* blue] Using one hand to hold the device steady, use your free hand and remove the 1.2mm Phillips #00 screwdriver to unscrew the four Phillips screws (as highlighted in the photo) from the motherboard.
[* green] Place the four screws in a safe place and then carefully lift up and remove the motherboard, then set it aside.
[* icon_note] ''Take a note of the moisture indicator located in the yellow rectangle on the bottom of the device in the second picture. If the moisture indicator is red then the device has water damage.''