Ir para o conteúdo principal

Alterações no passo #3

Edição por Elizabeth Ofori

Edição aprovada por Elizabeth Ofori

Antes
Depois
Sem alteração

Linhas de Passo

[* black] ***Remove the motherboard.***
[* blue] Using one had to hold the device steady, use your free hand and get the Phillips #000 screwdriver to unscrew the five Phillips screws (as highlighted in the photo) from the motherboard.
-[* black] Place the screws in a safe place and then carefully remove the logic board and set it aside.
+[* green] Place the screws in a safe place and then carefully lift up and remove the motherboard, then set it aside.
[* icon_note] ''Take a note of the moisture indicator located in the yellow rectangle on the bottom of the device in the second picture. If the moisture indicator is red then the device has water damage.''

Imagem 3

Nenhuma imagem anterior

Adicionado